I rewired the Router to another scart plug, at the same time, I used an extra 78L05 to power the 5v line on the i/o bus. Both the new wiring and power arrangements caused problems. (more…)
Using the Remote Control Unit with the Pic I2C Slave connected to the Midge Router, it is possible to use Blassic to control regular mains devices via the the network. Here is a sample. (more…)
Controlling mains powered devices using home built circuits risks exposing those circuits and the operator to mains voltages. This risk can be completely avoided by adapting one of the many Remote Mains Control Devices. (more…)
I have added a basic PWM service to the PIC 16F876 I2C Slave I/O Processor. Here is the updated JAL Source and a Blassic program for the Router. It reads the Analog input, and prints to the console or sounds a Beep using the PWM output. (more…)
Here is a little (extended)Blassic program to read the PIC 16F876A I2C Slave. (more…)