I rewired the Router to another scart plug, at the same time, I used an extra 78L05 to power the 5v line on the i/o bus. Both the new wiring and power arrangements caused problems. (more…)
Using the Remote Control Unit with the Pic I2C Slave connected to the Midge Router, it is possible to use Blassic to control regular mains devices via the the network. Here is a sample. (more…)
Here is a little (extended)Blassic program to read the PIC 16F876A I2C Slave. (more…)
The PCF8582C-2 is a 256×8 bit CMOS EEPROM. It contains less memory than some PIC Processors! As have a few of these chips, I use them as a benchmark for the Router and PIC I2C interfaces. (more…)
These are the I2C Bus Hardware and Software settings I am using with the on OpenWrt Midge router to talk to a PIC 16F876 I2C Slave. (more…)
These are the Connections I am using on the I/O Bus. (more…)